Netgear GS752TP - 52PT GE POE SMART SWITCH Manual Do Equipamento
24
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Step 4: Connect Devices to the Switch
The following procedure describes how to connect computers to the switch’s RJ-45 ports.
The switch contains Auto Uplink technology, which allows the attaching of devices using
either straight-through or crossover cables.
The switch contains Auto Uplink technology, which allows the attaching of devices using
either straight-through or crossover cables.
Figure 11. Connecting devices to the switch
Category 5 (Cat 5) Unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector
to make these connections.
to make these connections.
Note:
Ethernet specifications limit the cable length between the switch and
the attached device to 100 meters (328 feet).
the attached device to 100 meters (328 feet).
Step 5: Install an SFP Transceiver Module
The following procedure describes how to install an optional SFP transceiver module into one
of the SFP ports of the switch.
of the SFP ports of the switch.
Note:
Contact your NETGEAR sales office to buy these modules. If you do
not want to install an SFP module, skip this procedure.
not want to install an SFP module, skip this procedure.