Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Guia Do Administrador
Security
134
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
The following fields are displayed:.
Private VLAN Promiscuous Interface Configuration
Use this page to apply Private VLAN Promiscuous interface settings on selected device
interfaces.
interfaces.
To display the Private VLAN Promiscuous Interface Configuration page:
1.
Click Security > Traffic Control > Private VLAN > Private VLAN Promiscuous
Interface Configuration.
2.
Use Promiscuous Primary VLAN to set the Primary VLAN ID for Promiscuous Association
Mode. The range of the VLAN ID is 2-4093.
3.
Use Promiscuous Secondary VLAN ID(s) to set the Secondary VLAN ID List for
Promiscuous Association Mode. This field can accept single VLAN ID or range of VLAN IDs
or a combination of both in sequence separated by ','. You can specify individual VLAN ID.
Eg: 10 You can specify the VLAN range values separated by a '-'. E.g. 10-13 You can
specify the combination of both separated by ','. Eg: 12,15,40-43,1000-1005,2000 The range
of the VLAN ID is 2-4093.
Note:
The VLAN ID List given in this control will replace the configured
Secondary VLAN list in the association.
Secondary VLAN list in the association.
4.
If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take effect immediately.
The following fields are displayed:
ACL
Access control lists (ACLs) ensure that only authorized users have access to specific
resources while blocking any unwarranted attempts to reach network resources. ACLs are
used to provide traffic flow control, restrict contents of routing updates, decide which types of
resources while blocking any unwarranted attempts to reach network resources. ACLs are
used to provide traffic flow control, restrict contents of routing updates, decide which types of
Field
Description
Interface
Select the physical or LAG interface for which you
want to display or configure data.
want to display or configure data.
Operational VLAN(s)
Displays the operational VLAN(s).
Field
Description
Interface
Select the physical or LAG interface for which you
want to display or configure data.
want to display or configure data.
Operational VLAN(s)
Displays the operational VLAN(s).