Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Guia Do Administrador

traffic are forwarded or blocked, and above all provide security for the network. The switch 
software supports IPv4, IPv6 and MAC ACLs.

To configure an ACL, first create an IPv4-based, IPv6-based or MAC-based ACL ID. Then, 
create a rule and assign it to a unique ACL ID. Next, define the rules, which can identify 
protocols, source, and destination IP/IPv6 and MAC addresses, and other packet-matching 
criteria. Finally, use the ID number to assign the ACL to a port or to a LAG.

The ACL menu provides access to features described in the following sections:

ACL Wizard helps you to create a simple ACL and apply it to the selected ports easily and 

quickly. First, you can select an ACL type. Then, you can add an ACL rule to this ACL, and 
the rule can be applied to this ACL on the selected ports. The ACL Wizard enables you to 
create the ACL, but does not allow you to modify it. For more information about how to modify 
the ACL, see the instructions on the ACL configuration screen.



Select Security > ACL > ACL Wizard. 

From the ACL Type list, select the ACL type used to create the ACL. 

You can select from the following optional types:

ACL Based on Destination MAC. Creates an ACL based on the destination MAC 

address, destination MAC mask, and VLAN.

ACL Based on Source MAC. Creates an ACL based on the source MAC address, 

source MAC mask, and VLAN.

ACL Based on Destination IPv4. Creates an ACL based on the destination IPv4 

address and IPv4 address mask.

ACL Based on Source IPv4. Creates an ACL based on the source IPv4 address and 

IPv4 address mask.