Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador
Configuring Switching Information
92
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
2.
To configure Auto-VoIP interface settings for a physical port or a LAG port, click PORT,
LAGS, or ALL.
3.
Enter the interface name in the Go To Interface field and click the Go button.
The entry corresponding to the specified port is selected.
4.
Select Enable or Disable from the Auto-VoIP Mode drop-down list, as the Auto-VoIP
administrative mode for the interface.
5.
Click APPLY to send the updated configuration to the switch.
Spanning Tree Protocol
The Spanning Tree Protocol (STP) provides a tree topology for any arrangement of bridges.
STP also provides one path between end stations on a network, eliminating loops. Spanning
tree versions supported include Common STP, Multiple STP, and Rapid STP.
STP also provides one path between end stations on a network, eliminating loops. Spanning
tree versions supported include Common STP, Multiple STP, and Rapid STP.
Classic STP provides a single path between end stations, avoiding and eliminating loops. For
information about configuring Common STP, see
information about configuring Common STP, see
Multiple Spanning Tree Protocol (MSTP) supports multiple instances of spanning tree to
efficiently channel VLAN traffic over different interfaces. Each instance of the spanning tree
behaves in the manner specified in IEEE 802.1w, Rapid Spanning Tree (RSTP), with slight
modifications in the working but not the end effect (chief among the effects, is the rapid
transitioning of the port to ‘forwarding’). The difference between the RSTP and the traditional
STP (IEEE 802.1D) is the ability to configure and recognize full-duplex connectivity and ports
that are connected to end stations, resulting in rapid transitioning of the port to forwarding
state and the suppression of Topology Change Notification. These features are represented
by the parameters point-to-point and edgeport. MSTP is compatible with both RSTP and
STP, and can be configured to operate entirely as an RSTP bridge or an STP bridge.
efficiently channel VLAN traffic over different interfaces. Each instance of the spanning tree
behaves in the manner specified in IEEE 802.1w, Rapid Spanning Tree (RSTP), with slight
modifications in the working but not the end effect (chief among the effects, is the rapid
transitioning of the port to ‘forwarding’). The difference between the RSTP and the traditional
STP (IEEE 802.1D) is the ability to configure and recognize full-duplex connectivity and ports
that are connected to end stations, resulting in rapid transitioning of the port to forwarding
state and the suppression of Topology Change Notification. These features are represented
by the parameters point-to-point and edgeport. MSTP is compatible with both RSTP and
STP, and can be configured to operate entirely as an RSTP bridge or an STP bridge.
Note:
For two bridges to be in the same region, the force version should be
802.1s, and their configuration name, digest key, and revision level
should match. For more information about regions and their effect on
network topology, refer to the IEEE
802.1s, and their configuration name, digest key, and revision level
should match. For more information about regions and their effect on
network topology, refer to the IEEE
802.1Q
standard.
The STP link contains links to features described in the following sections:
•
•
•
•
•
•
•