Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports Guia Do Utilizador

On the Network screen, after you have selected the smart switch by clicking the table row that 
displays the smart switch, you can perform the following network-related functions:

DHCP Refresh. If the smart switch receives its IP address information from a DHCP 
server, click the DHCP Refresh button to force the smart switch to release the current 
bindings and request new address information from the DHCP server.

Reboot Device. Click the Reboot Device button to reboot the smart switch.

Web Browser Access. Click the Web Browser Access button to launch a web browser 
and connect to the web management interface for the smart switch.

Configure Device. Click the Configure Device button to change network information for 
the smart switch, including the IP address, DHCP client mode, system name, and 
location. For more information, see the following section, 

.

Change Password. Click the Change Password button to set a new password for the 
smart switch. For more information, see 



On the computer on which the Smart Control Center is installed, turn off the firewall 
temporarily.

The firewall might prevent the Smart Control Center from discovering the smart switch.

Start the Smart Control Center.

The Network screen displays and the Smart Control Center discovers your smart switch.

If the discovery function of the Smart Control Center does not operate automatically when 
you start the Smart Control Center, click the Discover button.

Select the smart switch by clicking the table row that displays the smart switch.

Click the Configure Device button.

The screen expands to display additional fields at the bottom of the screen.

Under DHCP, select the Disabled radio button.