Netgear FVS318N – Prosafe Wireless N VPN Firewall Folheto
Net Mode Configuration Commands
41
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv6 Tunnel Commands
net ipv6_tunnel isatap add
This command configures a new ISATAP tunnel. After you have issued the net
ipv6_tunnel isatap add
ipv6_tunnel isatap add
command, you enter the net-config [isatap-tunnel] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
time in the order that you prefer.
Note:
To configure an ISATAP tunnel, you first need to set the IP mode to
IPv4/IPv6 (see
Step 1
Format
Mode
net
Step 2
Format
Mode
net-config [isatap-tunnel]
Keyword
Associated Keyword to
Select or Parameter to Type
Select or Parameter to Type
Description
The IPv6 64-bit subnet prefix (string) that is assigned to
the logical ISATAP subnet for this intranet.
the logical ISATAP subnet for this intranet.
LAN
or Other_IP
Specifies the local endpoint IP address for the tunnel that
is initiated on the wireless VPN firewall. The endpoint can
be the LAN interface or a specific LAN IPv4 address. If you
select Other_IP, you also need to issue the
ipv4_address
is initiated on the wireless VPN firewall. The endpoint can
be the LAN interface or a specific LAN IPv4 address. If you
select Other_IP, you also need to issue the
ipv4_address
keyword to specify an IPv4 address.
The IPv4 address of a local endpoint that is not a LAN IPv4
address.
address.
Command example:
FVS318N> net ipv6_tunnel isatap add
net-config[isatap-tunnel]> subnet_prefix 2004::
net-config[isatap-tunnel]> end_point_type Other_IP
net-config[isatap-tunnel]> ipv4_address 10.29.33.4
net-config[isatap-tunnel]> save
Related show commands:
and
net ipv6_tunnel isatap add
subnet_prefix <subnet prefix>
end_point_type {LAN | Other_IP {ipv4_address <address>}}
subnet_prefix
subnet prefix
end_point_type
ipv4_address
ipaddress