Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

MRP Configuration

Use the MRP Configuration page to configure global MRP settings for the switch. To access 
the basic MRP Configuration page click the Switching tab, then click MRP 

 Basic  MRP 

Configuration.

 

To configure the MRP settings:

Use the MMRP Mode field to enable or disable MMRP globally on the switch. MMRP 

provides an application to register MAC address information. The default mode is 

Disable.

Use the MSRP Mode field to enable or disable MSRP globally on the switch. MSRP 

provides an application to register bandwidth requirement for a given AV stream. The default 

mode is Disable.

If you enable MSRP, configure the following MSRP settings:
a. Enable or disable MSRP talker pruning. The MSRP talker is the source of an AV 

stream. Default mode is Disable.

b.  Enable or disable the MRP Periodic State Machine for MSRP on the system. Default 

mode is Disable.

c.  In the MSRP Max Fan In Ports field, specify the maximum number of the ports 

where MSRP registrations are allowed.

d.  In the MSRP Max Frame Size field, specify the maximum frame size allowed for an 

MSRP frame. The valid range for the frame size is 64–9216 octets.

If you enable MMRP, enable or disable the MRP Periodic State Machine for MMRP on the 

system. Default mode is Disable. For this setting to take effect, MMRP must be enabled, but 

MSRP does not need to be enabled.