Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

Configure the 802.1Qav mapping for the Class A and/or Class B EAV streams. Class A 

streams have a higher transmission priority than Class B traffic.

In the EAV Priority field, specify the priority for each EAV stream class. The range is 

0–7.

In the EAV Remap Priority field, specify the remap priority for non-EAV traffic. The 

range is 0–7.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you make any changes to the page, click Apply to apply the change to the system.

MRP Port Settings 

Use the MRP Port Settings page to configure the per-port MRP mode and timer settings. The 
timers control when and how often various messages are transmitted on each interface. 

To access the Port Settings page click Switching

 MRP  Advanced  Port Settings in the 

navigation tree. In the following image, the MMRP mode on ports g4 and g5 is being enabled.

 

To configure the MRP port parameters:

Select the check box next to the port to configure. You can select multiple ports to apply 

the same settings to the selected interfaces. Select the check box in the heading row to 

apply the same settings to all interfaces.

Configure the following MRP port settings:
a. Enable or disable MMRP on the interface. The default mode is Disable.
b.  Enable or disable MSRP on the interface. The default mode is Disable.