Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Equipamento
Installation
41
Managed Stackable Switch Series M4300
Optional Step 6: Install SFP Transceiver Modules
The following optional procedure describes how to install an optional SFP transceiver module
into one of the SFP ports of the switch. For information about supported modules, see
into one of the SFP ports of the switch. For information about supported modules, see
Note:
Contact your NETGEAR sales office to purchase these modules. If
you do not want to install an SFP module, skip this procedure.
you do not want to install an SFP module, skip this procedure.
To install an SFP transceiver module:
1.
Insert the transceiver into the SFP port.
2.
Press firmly on the flange of the module to seat it securely into the connector.
The following figure shows model M4300-12X12F. However, you install SFP transceiver
modules in the SFP ports of the other models in the same manner.
modules in the SFP ports of the other models in the same manner.
Figure 19. Installing an SFP transceiver module
To install an SFP transceiver module in the M4300-48X:
1.
Insert the transceiver into the SFP port.
2.
Press firmly on the flange of the module to seat it securely into the connector.