Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless Guia Do Programa
Can I add a disk to for data protection?
RAID Level
Number of Disks per Volume
Yes. (Additional disk provides dual redundancy and converts the
volume to RAID 6.)
volume to RAID 6.)
RAID 5
3 or more
No. (Volume protection is already redundant.)
RAID 10
4 or more (even number)
No. (Volume is already protected with dual redundancy.)
RAID 6
4 or more
Disks added to a Flex-RAID volume can be used only for protection. They cannot be used for storage (horizontal
expansion). If you want to add a disk for increased storage capacity, you must do one of the following:
expansion). If you want to add a disk for increased storage capacity, you must do one of the following:
•
Create a volume using the added disks (see
on page 31).
•
Change the RAID level (see
on page 27).
•
on page 26).
To expand a Flex-RAID volume:
1.
Add two disks to your ReadyNAS storage system.
For more information about how to add a disk to your system, see the hardware manual for your system, which
is available at
For more information about how to add a disk to your system, see the hardware manual for your system, which
is available at
2.
Select System > Volumes.
The new disks are displayed in the enclosure graphic and are colored black.
Volume Configuration
38
ReadyNAS OS 6.4