Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador
You can also enter http://www.routerlogin.com or enter the modem router's IP
address in this format: http://192.168.1.1. The default IP address for the router is
http://192.168.1.1. If the modem router detects a conflict with a WAN IP address, it
changes its IP address to 10.0.0.1 or 172.16.5.1. The procedures in this manual use
http://www.routerlogin.net.
address in this format: http://192.168.1.1. The default IP address for the router is
http://192.168.1.1. If the modem router detects a conflict with a WAN IP address, it
changes its IP address to 10.0.0.1 or 172.16.5.1. The procedures in this manual use
http://www.routerlogin.net.
Note
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
case-sensitive.
The BASIC Home page displays.
Automatic Internet Setup
You can let the NETGEAR installation assistant set up your router automatically, or you can set up your
router manually. Before you start the setup process, get your ISP information and make sure that the
computers and devices in the network are using the settings described here. If you are installing a new
router on a network that already includes a router, see
router manually. Before you start the setup process, get your ISP information and make sure that the
computers and devices in the network are using the settings described here. If you are installing a new
router on a network that already includes a router, see
on page
22.
When your Internet service starts, your Internet service provider (ISP) typically gives you all the information
needed to connect to the Internet. For DSL service, you might need the following information to set up your
router:
needed to connect to the Internet. For DSL service, you might need the following information to set up your
router:
•
The ISP configuration information for your DSL account
•
ISP login name and password
•
Fixed or static IP address setting (special deployment by ISP; this setting is rare)
If you cannot locate this information, ask your ISP to provide it. When your Internet connection is working,
you no longer need to launch the ISP login program on your computer to access the Internet. When you
start an Internet application, your router automatically logs you in.
you no longer need to launch the ISP login program on your computer to access the Internet. When you
start an Internet application, your router automatically logs you in.
The NETGEAR installation assistant runs on any device with a web browser. Installation and basic setup
takes about 15 minutes to complete.
takes about 15 minutes to complete.
To use the NETGEAR installation assistant to automatically set up your router:
1.
Turn the router on by pressing the On/Off button.
2.
Make sure that your computer or WiFi device is connected to the router with an Ethernet cable (wired)
or over WiFi with the preset security settings listed on the label.
or over WiFi with the preset security settings listed on the label.
If you want to change the router’s WiFi settings, use a wired connection to avoid being
disconnected when the new WiFi settings take effect.
disconnected when the new WiFi settings take effect.
Note
3.
Launch a web browser.
The page that displays depends on whether you accessed the router before or if the the router is
connected to another router or gateway:
connected to another router or gateway:
Connect to the Network and Access the Modem Router
21
Nighthawk AC1900 WiFi LTE Modem Router