Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

Select a Router MAC Address radio button:

Use Default Address. Use the default MAC address.

Use Computer MAC Address. The modem router captures and uses the MAC address of the
computer that you are now using. You must use the one computer that the ISP allows.

Use This MAC Address. Enter the MAC address that you want to use.

Click the Apply button.

Your settings are saved.

Click the Test button to test your Internet connection.

If the NETGEAR website does not display within one minute, see 

 on

page 170.

You can change the modem router’s Internet connection mode from the Broadband Settings page.

Launch a web browser from a computer or mobile device that is connected to the network.

Etner http://www.routerlogin.net.

A login window opens.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > Broadband Settings.

The Broadband Settings page displays.

Select one of the following options from the Internet Connection Mode menu:

Use WAN Ethernet with mobile as back up in case of failure. The modem router connects to
the Internet using a WAN Ethernet connection. If the WAN Ethernet connection fails, it will use the
mobile broadband connection as backup.
For more information about how to set up failover mode, see 

 on page 31.

Always use mobile broadband connection. For you to use this mode, a micro SIM card must be
installed into the modem router.

Always use Ethernet connection. For you to use this mode, the modem router must be connected
to a modem, or your main Ethernet cable, to the Internet port on your modem router.

Click the Apply buton.

Your settings are saved.