Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador
a.
Log back in to the modem router.
The BASIC Home page displays.
b.
Select ADVANCED > Setup > Broadband Settings.
The Broadband Settings page displays.
c.
In the Internet Connection Mode menu, select Always use Mobile Broadband connection to
enable mobile broadband connection.
enable mobile broadband connection.
d.
Click the Apply button.
Your settings are saved.
e.
Select ADVANCED > Setup > Mobile Broadband Settings.
The Mobile Broadband Settings page displays.
f.
Specify your mobile broadband connection settings.
g.
Click the Apply button.
Your settings are saved.
h.
Test your modem router’s Internet connection to make sure that your modem router can connect
to the Internet.
to the Internet.
4.
Set up failover mode:
a.
Log back in to the modem router.
The BASIC Home page displays.
b.
Select ADVANCED > Setup > Broadband Settings.
The Broadband Settings page displays.
c.
In the Internet Connection Mode menu, select Use WAN Ethernet with mobile as back up in
case of failure.
case of failure.
The modem router will connect to the Internet using the WAN Ethernet connection. If the WAN
Ethernet connection fails, the modem router will connect to the Internet using the mobile broadband
connection.
Ethernet connection fails, the modem router will connect to the Internet using the mobile broadband
connection.
d.
(Optional) Enter a new ping IP address if you want to change it.
The modem router will ping this IP address if the WAN Ethernet connection fails.
e.
Click the Apply button.
Your settings are saved.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if the router does not detect it automatically.
To set up an IPv6 Internet connection:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
Specify Your Internet Settings
32
Nighthawk AC1900 WiFi LTE Modem Router