Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador
If you changed the LAN IP address of the modem router, you are disconnected when this change takes
effect.
effect.
9.
To reconnect, close your browser, relaunch it, and log in to the router.
Specify the IP Addresses That the Modem Router Assigns
By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router
assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned
default gateway address is the LAN address of the modem router.
assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned
default gateway address is the LAN address of the modem router.
These addresses must be part of the same IP address subnet as the modem router’s LAN IP address. Using
the default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you can
save part of the range for devices with fixed addresses.
the default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you can
save part of the range for devices with fixed addresses.
To specify the pool of IP addresses that the modem router assigns:
1.
Launch a web browser from a computer or mobile device that is connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
Your modem router might display information that is different from this example.
5.
Make sure that the Use Router as DHCP Server check box is selected.
6.
Specify the range of IP addresses that the router assigns:
Network Settings
63
Nighthawk AC1900 WiFi LTE Modem Router