Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

In the Starting IP Address field, type the lowest number in the range.

This IP address must be in the same subnet as the modem router.

In the Ending IP Address field, type the number at the end of the range of IP addresses.

This IP address must be in the same subnet as the modem router.

Click the Apply button.

Your settings are saved.

The modem router delivers the following parameters to any LAN device that requests DHCP:

An IP address from the range that you define

Subnet mask

Gateway IP address (the modem router’s LAN IP address)

DNS server IP address (the modem router’s LAN IP address)

By default, the modem router acts as a DHCP server. The router assigns IP, DNS server, and default gateway
addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address
of the modem router.

You can use another device on your network as the DHCP server or specify the network settings of all your
computers.

Launch a web browser from a computer or mobile device that is connected to the network.

Type http://www.routerlogin.net.

A login window opens.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup.

The LAN Setup page displays.

Clear the Use Router as DHCP Server check box.

Click the Apply button.

Your settings are saved.

(Optional) If this service is disabled and no other DHCP server is on your network, set your computer
IP addresses manually so that the computers can access the modem router.