Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Manual Do Equipamento
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
21
GS716T/GS724T Gigabit Smart Switch
Step 4: Connect Devices to the Switch
The following procedure describes how to connect computers to the switch’s RJ-45 ports.
The NETGEAR Smart Switch contains Auto Uplink™ technology, which allows the attaching
of devices using either straight-through or crossover cables.
The NETGEAR Smart Switch contains Auto Uplink™ technology, which allows the attaching
of devices using either straight-through or crossover cables.
Connect each computer to an RJ-45 network port on the Switch front panel (
). Use
Category 5 (Cat5) Unshielded Twisted-Pair (UTP) cable terminated with an RJ-45 connector
to make these connections.
to make these connections.
Note:
Ethernet specifications limit the cable length between the switch and
the attached device to 100 m (328 ft.).
the attached device to 100 m (328 ft.).
Figure 8. Connecting Devices to the Switch