Netgear RDD1 – ReadyDATA 516 Disk Packs RDD1LT02, RDD1LT03, RDD1LT04, RDD1SM01 Guia Do Programa
Configure the System Settings
69
ReadyDATA OS 1.4
2.
Configure the protocol settings one protocol at a time.
Setting the protocols is explained in the following:
•
•
•
Note:
For information about the Replicate button (see the previous figure),
see
see
.
Configure SMB, AFP, NFS, or SSH
The only option for these protocols is to enable or disable the protocol globally.
To enable or disable any of these protocols:
1.
Select System > Settings > Services.
The Services section of the Setting screen displays (the following figure shows the top of
the screen only):
the screen only):
2.
Click the protocol button (SMB, AFP, NFS, or SSH).
3.
Select the Enable check box to enable the protocol; clear the Enable check box to disable
the protocol.
the protocol.
4.
Click the Apply button.
WARNING:
For SSH, if you enable SSH root access, NETGEAR might deny you
technical support. If you do enable SSH root access, the SSH root
password is identical to the administrator password that you have
configured.
technical support. If you do enable SSH root access, the SSH root
password is identical to the administrator password that you have
configured.
Configure FTP
To configure FTP:
1.
Select System > Settings > Services.
The Services section of the Setting screen displays (the following figure shows the top of
the screen only):
the screen only):