Netgear DG834Gv2 – 54 Mbps Wireless ADSL Firewall Modem Manual De Referência
Reference Manual for the Model Wireless ADSL Firewall Router DG834G
F-14
NETGEAR VPN Configuration
202-10006-05, June 2005
Figure F-12: Addressing and subnet used for telecommuter example
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves the following two steps:
network gateway involves the following two steps:
•
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer’s
Main Office
Main Office
.
•
configures the NETGEAR ProSafe VPN Client endpoint.
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer’s Main Office
VPN Router at the Employer’s Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
Policy screen.
1.
Log in to the VPN router at its LAN address of
http://192.168.0.1
with its default user name of
admin
and password of
password
. Click the VPN Policies link in the main menu to display
the VPN Policies screen. Click Add Auto Policy to proceed and enter the information.
Gateway A
ntgr.dyndns.org
192.168.0.1/24
192.168.0.1
WAN IP
WAN IP
LAN IP
Client B
FQDN
0.0.0.0
Router
(at employer's
main office)
(at employer's
main office)
Telecommuter Example
NAT Router B
Router
(at telecommuter's
home office)
(at telecommuter's
home office)
PC
(running NETGEAR
ProSafe VPN Client)
(running NETGEAR
ProSafe VPN Client)
192.168.2.3
"fromDG834G.com"
"toDG834G.com"