Netgear D6000 – AC750 WiFi Modem Router - 802.11ac Dual Band Gigabit Manual Do Utilizador

If the modem router does not save the changes that you make in the web management 
interface, do the following:

When entering configuration settings, always click the Apply button before moving to 
another screen or tab or your changes are lost. 

Click the Refresh or Reload button in the web browser. It is possible that the changes 
occurred but that the old settings remain in the web browser’s cache.

If you are experiencing trouble connecting over WiFi to the modem router, try to isolate the 
problem:

Does the WiFi device that you are using find your WiFi network?

If not, check that the modem router’s WiFi LED 

 lights green. If this LED is off, the WiFi 

73.

Make sure that the WiFi settings in your WiFi device and modem router match exactly.

For a device that is connected over WiFi, the WiFi network name (SSID) and WiFi 
security settings of the modem router and WiFi computer must match exactly. The default 
SSID and password are on the product label (see 

If you disabled the modem router’s SSID broadcast, your WiFi network is hidden and 
does not display in your WiFi client’s scanning list. (By default, SSID broadcast is 
enabled.) For more information, see 

Does your WiFi device support the security that you are using for your WiFi network 
(WEP, WPA, or WPA2)? For information about changing the WiFi security, see 

56.

If you want to change the WiFi settings for the modem router, use an 
Ethernet cable to connect a computer to a LAN port on the modem 
router and then log in to the modem router.

If your WiFi device finds your network but the signal strength is weak, check these conditions:

Is your modem router too far from your WiFi device or too close? Place your WiFi device 
near the modem router but at least 6 feet (1.8 meters) away and see whether the signal 
strength improves.

Are objects between the modem router and your WiFi device blocking the WiFi signal?