KitchenAid 36" Designer Commercial-Style Hood Utilização E Cuidado

3. Slide the upper chimney cover over the chimney support and 

attach to the top of the support using two screws provided.

4. Slide the lower chimney cover over the chimney support and 

the upper cover. Attach to the bottom of the support using 
the 2 screws provided.

1. Remove the plastic covering from the chimney covers.

2. Discard the upper chimney cover supplied with the hood.

3. Slide the chimney cover provided with the extension kit over 

the lower chimney support and extension frame and secure 
to the top of the extension frame using the 2 screws 
provided.

4. Slide lower chimney cover over the chimney support and 

extension chimney cover and attach to the bottom of the 
support using the 2 screws provided.

1. Using two or more people, lift the hood up against the 

chimney support and attach canopy to the chimney support 
using the 4 hex washer head bolts provided. Tighten bolts 
securely.

2. From the underside of the hood, plug control cables together 

as shown.

3. Insert each connected cable into a black plastic connector 

box half.

4. Place the top half of the connector box over the bottom half 

of the connector box and screw the 2 halves together using 
the 4 screws provided for each connector box.

5. Using the 2 longer screws provided for each box, attach the 

assembled connector boxes to the metal flange.

A

B

C

A

A

B

C

A

A

B

B