KitchenAid 48-Inch Commercial-Style Series Island-Mount Canopy Hood Guia Da Instalação

4. Secure the lower chimney covers to the range hood canopy 

using 6 - 4.2 x 8 mm screws.

1. Remove the plastic covering from the chimney covers.

2. Discard the upper chimney cover supplied with the hood.

3. Slide upper chimney covers from the chimney extension kit 

into place until springs “click.”

4. Install the lower chimney covers over the upper chimney 

covers and slide them down to the top surface of the range 
hood canopy. 

5. Secure the lower chimney covers to the range hood canopy 

using 6 - 4.2 x 8 mm screws.

1. Install grease filters. See “Range Hood Care” section.

2. Check operation of the range hood blower and lights. See 

“Range Hood Use” section.

3. If range hood does not operate, check to see whether a 

circuit breaker has tripped or a household fuse has blown. 
Disconnect power supply and check that the wiring is 
correct.

NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.

The range hood is designed to remove smoke, cooking vapors 
and odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the 
kitchen.

The hood controls are located on the underside of the range 
hood.

B

A

A

A

B

C

D

E

A

B

C