Xerox Xerox Secure Access Unified ID System Support & Software Guia Do Administrador
Configuration & Management
Xerox Secure Access Administration Guide
26
Add MFP Devices to the Secure Access
Database
Each MFP must be registered in the Secure Access Database. You need to assign a unique name to
each MFP, and you require the network IP address of each device.
each MFP, and you require the network IP address of each device.
This step is divided in two sub-steps for ease of administration: Enter Device Parameters and Associate
the MFP with a Secure Access Authentication Device.
the MFP with a Secure Access Authentication Device.
Enter Device Parameters
1. In the Secure Access Manager, click Devices.
2. From the Settings, click Add... in the device listing.
3. In the Physical Device Summary dialog that appears, type the required information, outlined in the
2. From the Settings, click Add... in the device listing.
3. In the Physical Device Summary dialog that appears, type the required information, outlined in the
table below.
Note:
The Manufacturer and Model are populated automatically the first time the device contacts
the DRE. The next time you open this dialog, this information will be populated.
Setting
Description
Name
Type a unique name for this MFP. You will use this name to identify the
device in the Secure Access Manager.
device in the Secure Access Manager.
Hostname/IP address
Type either the IP address or the Hostname. Ensure that you can resolve the
Hostname if you do not know the IP address.
Hostname if you do not know the IP address.
Description
Enter a description that will help other Administrators identify the device,
usually by location. For example, “second floor, HR”.
usually by location. For example, “second floor, HR”.
Authentication Device
Select the Secure Access Authentication Device (from its MAC address) that
will control access to this MFP.
will control access to this MFP.
Note:
If you are using a Secure Access USB Card Reader you do not
associate an Authentication Device and you need to leave this as “<USB
Reader>”.
Reader>”.
Secure Access compatibility
•
MFP with Secure Access capability: Select if the MFP if using USB
Card Reader or if you are using a Xerox MFP which supports Secure
Access. Also enter the Admin ID and Password associated with this
MFP.
Card Reader or if you are using a Xerox MFP which supports Secure
Access. Also enter the Admin ID and Password associated with this
MFP.
•
Other type of MFP or printer: Select if the Authentication Device is
being used for Follow-You Printing with any MFP or printer which does
not support Secure Access.
being used for Follow-You Printing with any MFP or printer which does
not support Secure Access.
Server
Enter the servername that has DCE installed and will be controlling this MFP
or printer.
or printer.