Xerox Xerox Secure Access Unified ID System Support & Software Guia Do Administrador
Configuration & Management
Xerox Secure Access Administration Guide
33
11. Complete the remaining steps in the Add Printer wizard. When prompted, select Yes to print a test
page.
12. Confirm the Windows printer details and click Finish to exit the wizard, or Back to change settings
as necessary.
Create Pull Groups
The Pull Groups you create should reflect the needs of your organization. For example, you can group
compatible devices by physical location, by department, by manufacturer, and so on. You can also
create Pull Groups that include a selection of devices from a single print server.
compatible devices by physical location, by department, by manufacturer, and so on. You can also
create Pull Groups that include a selection of devices from a single print server.
The device driver selected for the pull group must be compatible with all devices associated with that
group. If you want a print job generated for one MFP to output successfully on another MFP, ensure
that the other printer can understand all of the print commands included in the data stream from the
driver.
1. In Secure Access Manager, click on one or more existing MFP devices that you want to assign to
group. If you want a print job generated for one MFP to output successfully on another MFP, ensure
that the other printer can understand all of the print commands included in the data stream from the
driver.
1. In Secure Access Manager, click on one or more existing MFP devices that you want to assign to
the same Pull Group.
2. In the Physical Device Summary dialog, select Release documents from pull group. Type in the
name of the Pull group (the name can be any name that makes sense to you), then click OK to
apply the change.
apply the change.
Note:
You only have to type in the name of the Pull group the first time you use it. Afterward, it
will appear in the list automatically.
3. Repeat steps 1 and 2 to select devices and create other Pull Groups.