Xerox DocuColor 12 Printer with Fiery EX12 Folheto

 

Settings for the following options can be specified via print options when you send a 
job to the Fiery. Some can also be set as defaults by the administrator during Fiery 
Setup or using ColorWise Pro Tools. Settings specified via print options override the 
defaults.

 

CMYK/Grayscale
or

 

Standard Color/Expert Color/Grayscale

Specifies the output color space of the job. Select CMYK, Standard Color, or 
Expert Color for a full-color document. 

 

On/Off/1–PgAutomatic

On/Off 

Specifies whether to print separated CMYK data as a single, four-color 
composite document (see 

). If you have the Fiery Graphic Arts 

Package option, you can combine an unlimited number of spot color 
separations along with the CMYK separations. 

 

 

Photographic/Presentation/Relative 
Colorimetric/Absolute Colorimetric
(Default set at Setup)

Applies a Fiery 

 

 (

 

) to 

 

), or to any incoming data with a PostScript 

 

 

definition, including CMYK.

 

85% Lightest to 115% Darkest

Performs a color adjustment on all 

 

 to make the printed output 

lighter or darker.

 

EFIRGB/sRGB 
(PC)/Apple Standard/Other/
Source 1-10/None 
(Default set at Setup or with 
ColorWise Pro Tools)

Applies an RGB source space definition to RGB data (see 

). If you 

choose the Other setting, you can specify particular settings for Gamma, 
Phosphors, and White Point. See the corresponding options in this table. This 
option, along with Gamma, Phosphors, and White Point, only affects 
DeviceRGB or calibrated RGB color spaces.

1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0

Applies the specified 

 value to the RGB source space definition (see 

). To use this print option, you must choose Other as the RGB Source 

setting.

 

Hitachi EBU/Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron

Applies the specified 

 (monitor type) information to the RGB source 

). To use this print option, you must choose 

Other as the RGB Source setting.