Xerox DocuColor 12 Printer with Fiery X12 Guia Da Instalação
4
4-15
General Setup options
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 5.
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 5.
The Fiery requires a unique, valid IP address. You can set a static address yourself, or
specify that the Fiery use DHCP, BOOTP, or RARP to obtain IP addresses
automatically.
specify that the Fiery use DHCP, BOOTP, or RARP to obtain IP addresses
automatically.
N
OTE
:
If you specify the DHCP, BOOTP, or RARP protocol, the Fiery reboots when
you save your changes and exit Setup. Allow the Fiery to reboot and return to Idle
before printing a Configuration page or proceeding with any other operations.
before printing a Configuration page or proceeding with any other operations.
To set the subnet mask, enter one of the following values:
255.0.0.0
if the IP address starts with a number less than 128
255.255.0.0
if the IP address starts with a number from 128 through 191
255.255.255.0
if the IP address starts with a number greater than 191