Xerox DocuColor 12 Printer with Fiery X12 Guia Da Instalação

In addition, you can enable the Printed queue, which is a storage area for the most 
recent jobs from the Print queue. The Printed queue makes it convenient to reprint 
those jobs. In Setup, you enable the Printed queue and specify the maximum number 
of jobs retained in it (see page 3-8). Reprinting jobs in the Printed queue requires the 
job management tools.

Jobs sent to the Hold queue are spooled to the Fiery hard disk for printing at a later 
time or for repeated printing. Because the Hold queue is a storage place, jobs sent to it 
cannot proceed through the printing process without intervention via the job 
management tools (see the Job Management Guide).

This is the standard Fiery queue. Jobs sent to the Print queue are processed and 
printed in the order they are received. Jobs prioritized by an operator from the job 
management tools and jobs sent via the Direct connection can take priority over 
jobs sent to the Print queue.

To use the Fiery utilities and Fiery WebTools, you must enable either the Hold queue 
or the Print queue.

The Direct connection transmits jobs directly to the Fiery, but only when the Fiery is 
not processing another job. If the Fiery is busy, the job remains at the user workstation 
until the Fiery is ready. The job is then processed as soon as the previous job is finished 
and before the next queued job is processed. 

Jobs sent to the Direct connection are not stored on the Fiery hard disk, and they 
cannot be selected for reprinting, moving, or deletion. Therefore, the Direct 
connection provides a measure of security for sensitive files. Jobs sent to the Direct 
connection do appear in the Job Log, for accounting purposes.

You cannot use the Direct connection for lpd printing over TCP/IP. 

To download fonts to the Fiery, you must publish the Direct connection.