Xerox DocuColor 12 Printer with Fiery X12 Folheto
1
1-20
Printing from Windows Computers
5.
Click the Finishing and Watermarks print option bars to specify the appropriate
settings for the print job, and click OK.
settings for the print job, and click OK.
These print options are specific to the Fiery and the copier. They override settings in
Fiery Printer Setup; the settings can also be changed in the Command WorkStation
Properties dialog box, or in the Fiery WebSpooler or Fiery Spooler Override Print
Settings dialog box. For information about these options and overrides, see
Appendix A.
Fiery Printer Setup; the settings can also be changed in the Command WorkStation
Properties dialog box, or in the Fiery WebSpooler or Fiery Spooler Override Print
Settings dialog box. For information about these options and overrides, see
Appendix A.
If you choose
Printer’s default
, the job prints according to the settings entered during
Setup, or the default settings.
N
OTE
:
Some PPD options can also be set from an application (for example, Reverse
Order or Collation). In these cases, use the PPD driver option to perform the function,
rather than setting it from the application. The application may not set up the file
properly for printing on the Fiery and may also take longer to process.
rather than setting it from the application. The application may not set up the file
properly for printing on the Fiery and may also take longer to process.
6.
Click OK in the Print dialog box.
T
O
SET
DEFAULT
PRINT
OPTIONS
FOR
ALL
W
INDOWS
NT 4.0
JOBS
USING
THE
PCL
PRINTER
DRIVER
:
1.
Click the Start button, point to Settings, and click Printers.
2.
Right-click to select the Fiery and choose Document Defaults.
3.
Click the Fiery Printing tab.
4.
Specify the appropriate default settings for all print jobs, as described starting on
page 1-19
page 1-19
5.
Click OK.