Zanussi ZCI68330XA Manual Do Utilizador

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.
To activate the function for a cooking
zone: touch 

.   comes on.

To deactivate the function: change the heat

setting.

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.
First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch   again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function: touch   of the

timer to set the time (00 - 99 minutes). When

the indicator of the cooking zone starts to flash

slowly the time counts down.
To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.
To change the time: set the cooking zone
with  . Touch   or  .
To deactivate the function: set the cooking
zone with   and touch  . The remaining time

counts back to 00. The indicator of the cooking

zone goes out. To deactivate the function you
can also touch   and   at the same time.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch  .
CountUp Timer (The count up timer)

You can use this function to monitor how long

the cooking zone operates.

To set the cooking zone: touch   again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function: touch   of the
timer.   comes on. When the indicator of the

cooking zone starts to flash slowly the time
counts up. The display switches between 

and counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with  . The

indicator of the cooking zone starts to flash

quickly. The display shows how long the zone

operates.
To deactivate the function: set the cooking
zone with   and touch   or  . The indicator

of the cooking zone goes out.
Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display
shows  ).

To activate the function: touch  . Touch 
or   of the timer to set the time. Cooking

zones display deactivates automatically after 10

seconds. When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch  .
To deactivate the function: activate for a

short time and deactivate left front cooking

zone.

The function has no effect on the

operation of the cooking zones.

This function sets all cooking zones that operate

to the lowest heat setting.
The function does not stop the timer functions.

To activate the function: touch  . 

comes on.

To deactivate the function: touch  . The

previous heat setting comes on.

If you change the heat setting, the

function stops and the display

shows the new heat setting.