Zanussi ZCI68330XA Manual Do Utilizador

Power function operates.

 + digit

There is a malfunction.

 /   / 

OptiHeat Control (3 step Residual heat indicator): continue cooking / keep

warm / residual heat.

Lock / The Child Safety Device function operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off function operates.

 /   /   There is a risk of burns

from residual heat. The indicator

shows the level of the residual heat.

The induction cooking zones make the heat

necessary for cooking process directly in the

bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

To set or change the heat setting turn the knob

to the correct heat setting. To deactivate turn
the knob to off position  .

automatically if:
• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol 

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time 

comes on and the hob deactivates.

, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

zone: turn the knob for a cooking zone to
position A.   comes on in the display.

Immediately set the correct heat setting.
To deactivate the function: turn the knob to

the off position.