AL-KO SnowLine 55 E 113 096 Manual Do Utilizador

Assembly

18

440829_a

1. Putting leadership together for the hand crank

at the side member.

2. Insert the hand crank through the guide on the

centre part.

3. Insert the hand crank into the holder on the

snow discharge and secure with split pin.

4. Bend  over  the  ends  of  the  split  pin  using

pliers.

➯

Attaching the snow discharge chute
see figure. 4
1. Lightly lubricate the surface of the snow disch-

arge chute that slides against the snow blo-

wer with spray oil

2. Mount the discharge chute
3. Putting discharge chute together with hexa-

gon head bolts on the snow discharge chute.

Putting control cable in
see figure 5

After 5 sec. the engine stops the safety

hangers adjust bowden cable, that after

letting off so!

1. Lower part puts the control cable (5-1) in in the

regulation elements (5-2) of the upper control

cable.

2. The protection draw control cable about the

regulation elements (5-2).

WARNING!
Never leave an engine running in an en-

closed space. Toxic hazard!

Please observe the safety and warning noti-

ces in this document and on the unit.
Remove  foreign  objects  from  the  working

area.
Keep others away from dangerous areas.
Work only when there is adequate daylight or

artificial lighting.
Store petrol and oil only in appropriate con-

tainers.
Allow the machine to cool before storing it in

an enclosed space.
Vor  dem  Unterstellen  des  Gerätes  Benzin-

tank  in  die  dafür  vorhergesehene  Behälter

entleeren.

If there is still petrol in the tank, make sure

that there is no ignition source in the enclosed

space, such as a heater or clothes dryer.
Add or empty petrol and oil in an open space

only when the engine is switched off and cold.
Do not overfill the tank (petrol expands).
Do not smoke while filling the tank.
Do not open the tank cap while the engine is

running or hot.
Replace the tank or cap if damaged.
Always secure the tank cap securely.
If petrol has spilled out:

Do not start the engine
Do not attempt ignition
Collect spilled petrol with a binding agent

or cloth and dispose of appropriately.
Clean the machine

No old oil:

put into the trash
into the sewage system or the drain
pour onto the earth

We recommend returning used oil in a closed con-

tainer to a recycling facility or service centre.
Filling with fuel and oil

WARNING!
Fire danger! Petrol is highly flammable!

Always follow the instructions in the en-

gine operating manual provided.

CAUTION!
Material damage!
Fuel the snow blower and add oil before

use. (0,6 l)

Clear snow right after it has fallen. If you wait

too long, the lower layer will ice up and make

clearing it more difficult.
Clear the snow so that each pass overlaps

slightly.
If possible, clear the snow in the direction of

the wind.