Cisco Cisco FirePOWER Appliance 7125 Guia Da Instalação
Version 5.3
Sourcefire 3D System Installation Guide
279
Pre-Configuring Sourcefire Appliances
Preparing the Appliance for Shipment
Appendix E
Preparing the Appliance for Shipment
To prepare the appliance for shipment, you must safely power down and
repackage the appliance:
•
If your Defense Center and managed device will not be used in the same
configuration at the target location, you must delete the device from the
Defense Center, then power down and repackage the appliances. See
•
To safely power down the appliance, see
•
To ensure that your appliance is safely prepared for shipping, see
Deleting Devices from a Defense Center
Unless you deploy the Defense Center and its managed device at the same target
location, you must delete the device from the Defense Center. This prevents the
device from looking for the UUID of the original Defense Center when you
register the device to a different Defense Center at the target location.
To delete a device from the Defense Center:
1. On the Defense Center, Select Devices > Device Management.
The Device Management page appears.
2. Next to the device you want to delete, click the delete icon (
).
When prompted, confirm that you want to delete the device. Communication
between the device and the Defense Center is discontinued and the device is
deleted from the Device Management page. If the device has a system policy
that causes it to receive time from the Defense Center via NTP, the device
reverts to local time management.
After deleting the device from the Defense Center, verify that the device is not
remotely managed by the Defense Center.
To verify that a device is not managed by a Defense Center:
On the managed device, you can use either the web interface or the CLI:
•
On the web interface of the managed device, go to System > Local >
Registration > Remote Management and confirm that the Host list on the
Remote Management screen is empty.
•
On the CLI of the managed device, run the command
show manager
and confirm that no host is displayed.