Cisco Cisco IPICS Release 2.1 Instruções Importantes De Segurança
Important Notes
42
Release Notes for Cisco IPICS Release 2.1(1)
OL-12993-01
This command specifies the use of RTCP for media inactivity (silence)
detection. It is required to enable RTCP packet detection as the only
mechanism to use for SIP media inactivity criteria to prevent RMS
disconnection.
detection. It is required to enable RTCP packet detection as the only
mechanism to use for SIP media inactivity criteria to prevent RMS
disconnection.
d.
Router(config-gateway)# timer receive-rtcp 5
This command enables the RTCP timer and configures a multiplication factor
for the RTCP timer interval for SIP or H.323.
for the RTCP timer interval for SIP or H.323.
For detailed information about configuring the RMS, refer to the “Configuring the
Cisco IPICS RMS Component” appendix in the
Cisco IPICS RMS Component” appendix in the
.
Where to Find More Information
Important Notes
The following section contains important information that pertains to this release
of Cisco IPICS.
of Cisco IPICS.
•
•
•
•
Using Cisco Security Agent with the PMC
When you have Cisco Security Agent (CSA) installed on the PMC client machine,
be aware that you may be prompted with CSA access permission dialog boxes for
various operations that you are trying to perform.
be aware that you may be prompted with CSA access permission dialog boxes for
various operations that you are trying to perform.
Note
Whenever CSA prompts you for permission, while you are performing any
operation on the PMC, be sure to always click Yes to grant permission and
continue with that operation.
operation on the PMC, be sure to always click Yes to grant permission and
continue with that operation.