Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Cisco
  4. Cisco Computer Telephony Integration OS 8.5
  5. Guia Do Programador

Cisco Cisco Computer Telephony Integration OS 8.5 Guia Do Programador

Download
Página de 278
5-146
CTI Server Message Reference Guide (Protocol Version 9) Release 7.0(0)
Chapter 5      Application Level Interfaces
Client Control Service
RECONNECT_CALL_REQ
Use this message to request the combined action of clearing an active call and then retrieving an existing 
held call. The RECONNECT_CALL_REQ message is defined in 
MessageHeader
Standard message header. 
MessageType = 59.
MHDR
8
InvokeID
Set to the same value as the InvokeID 
from the corresponding request 
message.
UINT
4
NewConnectionC
allID
The Call ID value assigned to the call 
by the peripheral or ICM software.
UINT
4
NewConnection
DeviceIDType
Indicates the type of the device 
identifier supplied in the 
NewConnectionDeviceID floating 
field (
).
USHORT
2
LineHandle
This field identifies the teleset line 
used, if known. Otherwise this field is 
set to 0xffff.
USHORT
2
LineType
Indicates the type of the teleset line 
given in the LineHandle field 
(
).
USHORT
2
Floating Part
Field Name
Value
Data Type
Max. 
Size
NewConnection
DeviceID 
The device identifier of the device 
associated with the connection.
STRING
64
Maximum message size (including header):
88
Table 5-111
MAKE_PREDICTIVE_CALL_CONF Message Format (continued)
Table 5-112
RECONNECT_CALL_REQ Message Format 
Fixed Part
Field Name
Value
Data Type
Byte 
Size
MessageHeader
Standard message header. 
MessageType = 60.
MHDR
8
InvokeID
An ID for this request 
message, returned in the 
corresponding confirm 
message.
UINT
4
PeripheralID
The PeripheralID of the ACD 
where the calls are located.
UINT
4
ActiveConnectionCallID
The Call ID value assigned to 
the currently active call by the 
peripheral or ICM software.
UINT
4