Cisco Cisco Unified MeetingPlace Audio Server Manual De Manutenção
4-50
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
960 E1 ports
This section explains how to use the “blade” command when configuring 960 E1 ports.
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see
logging, see
.
Step 2
At the tech$ prompt, type
blade -e 960
and press Enter.
Step 3
Confirm the “blade” command you entered and type
y
and press Enter. If you entered the wrong
command, type
n
and press Enter, then re-enter the correct command.
The server responds by telling you how many ports it is configuring. When the tech$ prompt appears, it
is complete. See
is complete. See
.
Figure 4-55
b
lade Example for 960 E1 Ports
Step 4
Verify your configuration by typing
blade
and pressing Enter.
Step 5
.
meetingplace:tech$ blade -e 960
This will reset many DB tables, are you sure? (y/n): y
Configuring 960 E1 ports
Restart the system for changes to take effect
meetingplace:tech$