Cisco Cisco TelePresence MX700 Referências técnicas
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
102
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Video Output Connector [n] Resolution
This setting applies to Connector [2..3] for MX800 Single, and Connector [3] for MX700 and
MX800 Dual.
Define the resolution and refresh rate for the connected screen.
Define the resolution and refresh rate for the connected screen.
Requires user role: ADMIN, USER
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Video Output Connector
n
Resolution:
Resolution
where
n
: Unique ID that identifies the video output connector. Range: 2..3 for single monitor
systems; 3..3 for dual monitor systems
Resolution
: Auto/1280_720_50/1280_720_60/1920_1080_50/1920_1080_60/1920_1200
_50/1920_1200_60
Auto: The system will automatically try to set the optimal resolution based on negotia-
tion with the connected monitor.
1280_720_50: The resolution is 1280 x 720, and the refresh rate is 50 Hz.
1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1920_1200_50: The resolution is 1920 x 1200, and the refresh rate is 50 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
1280_720_60: The resolution is 1280 x 720, and the refresh rate is 60 Hz.
1920_1080_50: The resolution is 1920 x 1080, and the refresh rate is 50 Hz.
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
1920_1200_50: The resolution is 1920 x 1200, and the refresh rate is 50 Hz.
1920_1200_60: The resolution is 1920 x 1200, and the refresh rate is 60 Hz.
xConfiguration Video Presentation DefaultSource
Define which video input source to use as a default presentation source. This setting may be
used by the API and 3rd party user interfaces. It is not relevant when using the user interfaces
provided by Cisco.
Requires user role: ADMIN, USER
Default value: 3
Default value: 3
USAGE:
xConfiguration Video Presentation DefaultSource:
DefaultSource
where
DefaultSource
: 1/2/3/4
The video input source to use as default presentation source.
xConfiguration Video Selfview Default Mode
Define if the main video source (self-view) shall be displayed on screen after a call. The position
and size of the self-view window is determined by the Video Selfview Default PIPPosition and
the Video Selfview Default FullscreenMode settings respectively.
Requires user role: ADMIN
Default value: Current
Default value: Current
USAGE:
xConfiguration Video Selfview Default Mode:
Mode
where
Mode
: Off/Current/On
Off: self-view is switched off when leaving a call.
Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call;
Off: self-view is switched off when leaving a call.
Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call;
if it was off during the call, it remains off after the call.
On: self-view is switched on when leaving a call.
On: self-view is switched on when leaving a call.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration