Cisco Cisco Agent Desktop 8.5 Guia Da Instalação
CAD Configuration Setup Utility
February 21, 2013
91
VoIP Monitor Service
The VoIP Monitor service step only appears during update mode.
Select the IP address of the network adaptor to which voice packets are sent to be
sniffed by the VoIP Monitor service (if this is a server box) or the desktop monitor (if
this is a client desktop).
sniffed by the VoIP Monitor service (if this is a server box) or the desktop monitor (if
this is a client desktop).
■
On a VoIP Monitor service server, it is the IP address of the NIC that is
connected to the port configured for SPAN.
connected to the port configured for SPAN.
■
On a client desktop computer, it is the IP address of the NIC on which the
computer is daisy-chained to the phone.
computer is daisy-chained to the phone.
NOTE: If you change these settings after initial setup, you must
restart the VoIP Monitor service or the client application (depending
on where you run Configuration Setup) to ensure that the change is
registered with them properly.
restart the VoIP Monitor service or the client application (depending
on where you run Configuration Setup) to ensure that the change is
registered with them properly.
Figure 23.
VoIP Monitor Service