Cisco Headend System Release 2.7
Chapter 3 System Release 2.7/3.7/4.2 SP2 Installation Procedures
90
4019475 Rev D
Install the Solaris Patches on the Application
Server
Server
Restarting the Application Server in Single-User Mode
Before you can install the Solaris patches, you need to restart the Application Server
in single-user mode. Complete the following steps to restart the Application Server
in single-user mode.
1 At the ok prompt on the Application Server, type boot -s and then press Enter.
in single-user mode. Complete the following steps to restart the Application Server
in single-user mode.
1 At the ok prompt on the Application Server, type boot -s and then press Enter.
The Application Server boots into single-user mode and the password prompt
appears.
appears.
2 Type the root password and then press Enter. The console prompt (#) appears.
3 Insert the CD labeled similarly to Solaris Patches into the CD drive of the
3 Insert the CD labeled similarly to Solaris Patches into the CD drive of the
Application Server.
4 At the console prompt, type TERM=vt100; export TERM and then press Enter.
The terminal environment for the Application Server console is set to vt100.
5 At the console prompt, type stty erase and then a space. Press the Backspace
key, then press Enter. The system sets the Backspace key to erase.
6 Choose one of the following options based upon the type of Application Server
you are upgrading:
If you are upgrading a Sun Blade 150 server, type
mount -F hsfs /dev/dsk/c0t1d0s0 /mnt and then press Enter.
mount -F hsfs /dev/dsk/c0t1d0s0 /mnt and then press Enter.
If you are upgrading a Sun Ultra 5 server, type
mount -F hsfs /dev/dsk/c0t2d0s0 /mnt and then press Enter.
mount -F hsfs /dev/dsk/c0t2d0s0 /mnt and then press Enter.
If you are upgrading a Sun V240 server, type
mount -F hsfs /dev/dsk/c0t0d0s0 /mnt and then press Enter.
mount -F hsfs /dev/dsk/c0t0d0s0 /mnt and then press Enter.
Result: The system mounts the Solaris patch CD to /mnt.
Installing the Solaris Patches on the Application Server
Complete the following steps to install the Solaris patches on the Application Server.
Notes:
You should still be logged on to the console of the Application Server as root
user.
user.
Installation of the Solaris patches should take no longer than 45 minutes.