Cisco Headend System Release 2.7 Guia Da Instalação
Configure the ASI Card
4023737 Rev C
121
Configure the ASI Card
Now that you have installed the ASI package, follow these instructions to configure
the ASI card.
1 Type cd /dvs/dncs/bin and then press Enter. The /dvs/dncs/bin directory
the ASI card.
1 Type cd /dvs/dncs/bin and then press Enter. The /dvs/dncs/bin directory
becomes the working directory.
2 Type ./configureASI.pl and then press Enter. If the configuration script detects a
problem with how the card is configured, the script displays a message seeking
confirmation to correct the problem.
confirmation to correct the problem.
3 Type y and then press Enter. The system modifies the configuration of the Direct
ASI card and prompts you to reboot the computer.
4 Type /usr/sbin/shutdown -g0 -i6 -y and then press Enter. The DNCS reboots.
5 Log in to the DNCS as dncs user.
6 At the ok prompt on the Application Server, type boot.
7 Log in to the Application Server as dncs user.
8 Go to Check the Status of the ASI Card (on page 122).
5 Log in to the DNCS as dncs user.
6 At the ok prompt on the Application Server, type boot.
7 Log in to the Application Server as dncs user.
8 Go to Check the Status of the ASI Card (on page 122).