Cisco Headend System Release 2.7 Guia Da Instalação
Appendix C
Direct ASI Installation and Configuration Procedures
124
4023737 Rev C
Restarting the Application Server
This section provides procedures for restarting either a SARA Server or a third-party
server. Choose the procedure that pertains to your system.
server. Choose the procedure that pertains to your system.
Restarting the Application Server at SARA Sites
1 Press the middle mouse button on the Application Server and select App Serv
1 Press the middle mouse button on the Application Server and select App Serv
Start.
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
open a remote shell on the Application Server.
b Proceed to step 2 and run the commands from the remote shell.
2 From an xterm window on the Application Server, type appControl and then
press Enter. The Applications Control window opens.
3 Select option 2 on the Applications Control window. The system displays a list of
Application Server processes and their current status.
Note: The system updates the display periodically, or you can press Enter to
force an update.
Note: The system updates the display periodically, or you can press Enter to
force an update.
4 When the Application Control window indicates that the current state (Curr Stt)
of each process is running, follow the on-screen instructions to close the
Applications Control window.
Applications Control window.
Restarting the Application Server at Rovi Corporation Sites
Complete the following steps to verify that the Passport resident application has
started on the Application Server, and then to start it, if necessary.
1 Open an xterm window on the Application Server.
2 Type CheckServices and then press Enter. A list of drivers appears.
started on the Application Server, and then to start it, if necessary.
1 Open an xterm window on the Application Server.
2 Type CheckServices and then press Enter. A list of drivers appears.
Note: Each driver is associated with an Application Server process.
3 Does the word Yes appear next to each driver, indicating that the process has
started?
If yes, you have completed this procedure.
If no, go to step 4.
4 Press the middle mouse button, and then select Passport Start.
5 When the word Yes appears next to each driver, go to step 6.
6 Follow the on-screen instructions to close the window containing the list of
5 When the word Yes appears next to each driver, go to step 6.
6 Follow the on-screen instructions to close the window containing the list of
drivers associated with the Passport resident application.