Cisco Headend System Release 2.7 Guia Da Instalação
Set Up the QAM
4023737 Rev C
133
8 Now, follow these instructions to configure the remainder of the Set Up QAM
window.
a Click the arrow to the right of the Headend Name field and choose the
a Click the arrow to the right of the Headend Name field and choose the
appropriate headend.
b Click the arrow to the right of the Device Type field and choose the
appropriate device (probably ASI).
c Click the arrow to the right of the Device Name field and choose the
appropriate device name.
d Click the arrow to the right of the Port Number field and set the port number
to 0 (zero).
Example: When you are finished, the Set Up QAM window should look similar
to the following example.
to the following example.
9 Click Save. The system saves the QAM configuration.
Note: A message may appear that concerns the QAM connection with Spectrum.
You can ignore such a message. Click Save one or two more times until the QAM
configuration is saved without any messages.
You can ignore such a message. Click Save one or two more times until the QAM
configuration is saved without any messages.