Cisco Headend System Release 2.7 Guia Da Instalação
Remove the NMI Software
4023737 Rev C
49
Remove the NMI Software
1 Are you already root user in an xterm window on the DNCS?
If yes, go to step 3.
If no, go to step 2.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Type pkginfo -l | grep SAInmi and then press Enter. The system lists the
SAInmi package if it is installed.
4 Is SAInmi installed?
If yes, go to step 5.
If no, you do not have NMI loaded onto your system. Skip the rest of this
procedure, and go to Stop System Components (on page 50).
procedure, and go to Stop System Components (on page 50).
5 Close any user interfaces that may be open on the DNCS.
Note: If the DNCS has any open user interfaces, you cannot remove the NMI
software.
software.
6 Type ps -ef | grep ui and then press Enter. The system displays a list of user
interface processes that may still be running.
7 On a sheet of paper, write down the process IDs (PIDs) of any user interface
process that is still running.
8 Type kill -9 [PID] and then press Enter for any user interface process that is still
running. The system stops the user interface processes.
9 Type pkgrm SAInmi and then press Enter. The system deletes the NMI
software.