Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Configuration
▀ Configuring the System to Perform as a Serving-CSCF
▄ Cisco ASR 5000 Series Session Control Manager Administration Guide
OL-22952-01
Configuring the System to Perform as a Serving-CSCF
This section provides a high-level series of steps and the associated configuration file examples for configuring the
system to perform as a Serving-CSCF in a test environment. For a more robust configuration example, refer to the
Sample Configuration Filesappendix.
system to perform as a Serving-CSCF in a test environment. For a more robust configuration example, refer to the
Sample Configuration Filesappendix.
To configure the system to perform as a Serving-CSCF:
Step 1
Set system configuration parameters such as activating PSCs by applying the example configurations found in the
System Administration Guide.
System Administration Guide.
Step 2
Set initial configuration parameters such as creating the VPN context and CSCF service by applying the example
configurations found in the
configurations found in the
Step 3
Configure S-CSCF context parameters by applying the example configuration found in the
Step 4
Configure the system to perform as a Serving-CSCF and set basic CSCF parameters such as service configuration,
default AoR domain configuration, CSCF peer servers, access control, translation and route lists, and session template
by applying the example configurations presented in the
default AoR domain configuration, CSCF peer servers, access control, translation and route lists, and session template
by applying the example configurations presented in the
Step 5
Optional: Configure the S-CSCF to also perform as an Interrogating-CSCF by applying the example configurations
presented in the
presented in the
Step 6
Configure accounting service by applying the example configuration found in the
Step 7
Log system activity by applying the example configuration found in the
Step 8
Save the configuration by following the steps found in the
Initial Configuration
Step 1
Set local system management parameters by applying the example configuration in the
section.
Step 2
Create the context where the S-CSCF service will reside by applying the example configuration in the
Step 3
Create the S-CSCF service within the newly created context by applying the example configuration in the
Modifying the Local Context
Use the following example to set the default subscriber and configure remote access capability in the local context: