Cisco Cisco MDS 9000 NX-OS Software Release 6.2

m9200-s2ek9-mz-npe.6.2.13b.bin

m9250-s5ek9-kickstart-mz-npe.6.2.13b.bin

m9250-s5ek9-mz-npe.6.2.13b.bin

m9300-s1ek9-kickstart-mz-npe.6.2.13b.bin

m9300-s1ek9-mz-npe.6.2.13b.bin

m9500-sf2ek9-kickstart-mz-npe.6.2.13b.bin

m9500-sf2ek9-mz-npe.6.2.13b.bin

m9700-sf3ek9-kickstart-mz-npe.6.2.13b.bin

m9700-sf3ek9-mz-npe.6.2.13b.bin

When downloading software, ensure that you select the correct software images for you Cisco MDS 9000 Series switch. 
Nondisruptive software upgrades or downgrades between NPE images and non-NPE images are not supported.

This section lists the guidelines recommended for upgrading your Cisco MDS NX-OS software image and includes the 
following topics:

Before you begin the upgrade process, review the list of chassis and modules that Cisco MDS NX-OS 
Release 6.2(13b) supports. See the 

For detailed instructions for performing a software upgrade using Cisco DCNM, see the Cisco DCNM Release Notes, Release 
6.2, which is available from the following website:

Follow these general guidelines before performing a software upgrade:

Review the nondisruptive upgrade path to Release 6.2(13b) in 

.

Install and configure dual supervisor modules before the upgrade. 

Issue the show install all impact upgrade-image CLI command to determine if your upgrade will be nondisruptive.

Be aware that some features impact whether an upgrade is disruptive or nondisruptive:

Fibre Channel Ports: Fibre Channel ports can be nondisruptively upgraded without affecting traffic on the ports. See 

 for the nondisruptive upgrade path for all NX-OS and SAN-OS releases.