Cisco Cisco 10 Gigabit Modules Guia Da Instalação

Remove the dust plugs from the XFP transceiver module optical bores.

Immediately attach the network interface cable LC connectors to the XFP transceiver module. (See 

.)

The XFP transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar 
individual grounding device when handling XFP transceiver modules or coming into contact with 
modules.

If you are removing an XFP transceiver, follow these steps:

Disconnect the network interface cable from the XFP transceiver module connectors. Immediately 
reinstall the dust plug in the fiber-optic cable LC connector.

Pivot the XFP transceiver module bail clasp up to release the XFP transceiver module from the socket. 
(See 

, top view.)

Slide the XFP transceiver module out of the socket. Pivot the bail clasp down and immediately install 
the dust plug in the XFP transceiver module optical bores. (See 

, bottom view.) 

Immediately place the XFP transceiver module in an antistatic bag.

1

LIN

K

LINK

ACTIVE

ACTIV

E

2

144377

Network interface

cable

LC connector

XFP transceiver