Cisco Cisco UCS C3160 Rack Server Ficha De Dados

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

STEP 11

SELECT NIC MODE (OPTIONAL)

By default, the C220 M3 server NIC mode is configured to be Shared LOM Extended. This NIC
mode allows any LOM port or adapter card port to be used to access the Cisco Integrated
Management Controller (CIMC). The Cisco adapter card must be installed in a slot with NCSI
support.

To change the default NIC mode to Dedicated, select the PID shown in

Table 19

. In Dedicated

NIC mode, the CIMC can be accessed only through the dedicated management port. See

Chassis

Rear View, page 7

for the location of the management port.

For more details on all the NIC mode settings, see

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/2-0/b_
Cisco_UCS_C-series_GUI_Configuration_Guide_201.pdf

Table 19

Dedicated NIC Mode Ordering Information

Product ID (PID)