Cisco Cisco UCS B260 M4 Blade Server Ficha De Dados
Cisco UCS B460 M4 Blade Server (with Intel® Xeon E7 v3 CPU)
48
SUPPLEMENTAL MATERIAL
Network Connectivity
This section shows how the supported adapter card configurations for each one of the two Blade Modules
connecting to the Fabric Extender modules in the 5108 blade server chassis. Recall that the B460 M4 E7 v3
consists of two cross-connected Scalable M4 Blade Modules.
connecting to the Fabric Extender modules in the 5108 blade server chassis. Recall that the B460 M4 E7 v3
consists of two cross-connected Scalable M4 Blade Modules.
There are three configurable adapter slots on each one of the two Blade Modules for B460 M4 E7 v3. For
each Blade Module, one slot supports only the VIC 1340/1240 adapter, and two additional slots can
accommodate Cisco as well as the Storage Accelerator adapters.
each Blade Module, one slot supports only the VIC 1340/1240 adapter, and two additional slots can
accommodate Cisco as well as the Storage Accelerator adapters.
shows supported
adapter configurations. You must install at least one VIC or CNA in one of the six adapter slots.
“Adapter 1,” “Adapter 2,” and “Adapter 3” refer to the UCSM naming convention for the adapter slots (this
document uses the UCSM naming convention). In the server BIOS and on the motherboard, the
corresponding slots are labeled as “mLOM,” “Mezz 1,” and “Mezz 2,” respectively. See
document uses the UCSM naming convention). In the server BIOS and on the motherboard, the
corresponding slots are labeled as “mLOM,” “Mezz 1,” and “Mezz 2,” respectively. See
.
Total bandwidth is a function of the Fabric Extender, the adapter, and the adapter slot, as shown in
.
Table 27 Adapter Slot Naming and Bandwidth
B460 M4 E7 v3 Blade
Module
Server BIOS and
Motherboard Slot Naming
Motherboard Slot Naming
UCSM Slot
Naming
Naming
Available Bandwidth
“Slave” Blade Module
(top)
mLOM (VIC 1340/1240 only)
Adapter 1
20 Gbps per Fabric Extender
Mezz1
Adapter 2
20 Gbps per Fabric Extender
Mezz2
Adapter 3
40 Gbps per Fabric Extender
“Master” Blade Module
(bottom)
mLOM (VIC 1340/1240 only)
Adapter 1
20 Gbps per Fabric Extender
Mezz1
Adapter 2
20 Gbps per Fabric Extender
Mezz2
Adapter 3
40 Gbps per Fabric Extender
Table 28
Maximum Bandwidth Using Dual Fabric Extenders (FEXs)
FEX Model
Maximum Bandwidth Using Dual FEXs
2208XP
160 Gb
2204XP
160 Gb
2104XP
40 Gb
Table 29
Maximum Bandwidth for Each of the Three Adapter Slots
Adapter Slot
Maximum Bandwidth Using Dual FEXs
VIC 1340/1240 (Adapter 1) slot
40 Gb
Adapter 2 Slot
40 Gb
Adapter 3 Slot
80 Gb