Cisco Cisco UCS B230 M1 Blade Server Ficha De Dados

Each CPU controls four memory channels, as follows (refer to 

):

■

Channels A, B, C, and D

— Bank 0: A0 (blue DIMM slot), C0 (white DIMM slot), B0 (yellow DIMM slot), D0 (black 

DIMM slot)

— Bank 1: A1 (blue DIMM slot), C1 (white DIMM slot), B1 (yellow DIMM slot), D1 (black 

DIMM slot)

The DIMM and CPU physical layout is shown in 

. Each CPU is located to the right of the DIMMs it 

controls.

See 

. Note that DIMMs in slots of the same color must be electrically paired with each 

other, and should be populated with identically matched DIMMs that were ordered as a pair. Do not swap a 
paired DIMM with a DIMM that is not identical in manufacturer part number.

When considering the memory configuration of your server, you should observe the following: 

■

There is only one DIMM slot (one bank) in each of the DDR channels. Therefore, all DIMM 
pairs in a B440 M2 server must be identical.

■

Your selected CPU(s) can have some effect on performance. All CPUs in the server must be 
of the same type.

■

Performance degradation can result from the following:

— Mixing DIMM sizes and densities within a pair is not allowed and both DIMMs in the 

pair will be logically removed from the memory array

NOTE:  DIMMs installed in slots for an absent CPU are not recognized.