Cisco Cisco UCS C210 M1 General-Purpose Rack-Mount Server White Paper
27 © 2016 Cisco and/or its affiliates. All rights reserved.
8. Click
Next. In the Caching configuration window, select the Skip cache allocation radio button.
Note: Optionally, you can enable an SSD cache device on the VSA. RAID 1 with two SSD devices is recommended (check
the box). Select the SSD volumes to be used as the cache storage. When the VSA is deployed, cache storage with the
default chunk size is created automatically and is ready for use by simple and mirrored volumes. For more information
about this licensed feature, see
the box). Select the SSD volumes to be used as the cache storage. When the VSA is deployed, cache storage with the
default chunk size is created automatically and is ready for use by simple and mirrored volumes. For more information
about this licensed feature, see
.
9. You can let the Networking page acquire IP addresses through Domain Host Configuration Protocol (DHCP), as shown
in Figure 33, or you can set the IP addresses statically. Select the network interface and click
Configure to select the
interface traffic types. In the setup discussed here, the virtual machine network interface is configured for management
and iSCSI1 traffic, and the iSCSI2 interface is configured for iSCSI and mirroring traffic, as shown in Figure 34.
and iSCSI1 traffic, and the iSCSI2 interface is configured for iSCSI and mirroring traffic, as shown in Figure 34.
Figure 33. Configuring Network Interfaces Automatically with DHCP