Cisco Cisco Agent Desktop 8.5 Guia Da Instalação
CAD Configuration Setup Utility
August 8, 2012
67
Services Configuration
The Services Configuration window only appears during update mode.
If the computer has more than one IP address, select the IP address of the NIC used
to connect to the LAN—it must be accessible by the client desktops.
to connect to the LAN—it must be accessible by the client desktops.
To enable CAD automated updates, select Yes. Automated updates cause Agent
Desktop, Supervisor Desktop, and Desktop Administrator to look for newer versions
every time they start. If one is found, the update process is run automatically.
Desktop, Supervisor Desktop, and Desktop Administrator to look for newer versions
every time they start. If one is found, the update process is run automatically.
To connect to Unified CM, the BIPPA service must have identical user IDs and
passwords configured in this window and in Unified CM. You can complete the fields in
this window before configuring the user in Unified CM. To configure credentials in
Unified CM, see
passwords configured in this window and in Unified CM. You can complete the fields in
this window before configuring the user in Unified CM. To configure credentials in
Unified CM, see
NOTE: If you change any of these settings, you must restart all CAD
services to ensure that the change is registered with them properly.
services to ensure that the change is registered with them properly.
Figure 19.
Services Configuration