Cisco Cisco TelePresence MX700 Manual De Manutenção
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
51
Cisco TelePresence MX700 and MX800
Administrator Guide
Connect input sources
(page 2 of 2)
About video and content quality
Use the
Video > Input > Connector n > Quality
setting to optimize
quality with respect to motion or sharpness.
Typically, you should choose
Motion when a large number of
participants are present or when there is a lot of motion in the
picture. Choose
Sharpness when you want the highest quality of
detailed images and graphics.
The default value is
Motion for Connector 2; and Sharpness for
Connector 3 and 4.
Set type and name for the input sources
We recommend that you set type and name for the input sources:
•
Video > Input > Connector n > InputSourceType
•
Video > Input > Connector n > Name
These settings determine the names and icons that are shown
on the user interfaces. Intuitive names and icons make source
selection easier.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Peripherals